storage medium
Any hardware, such as a disk or tape, used to store data.
590 entries in this trade.
Any hardware, such as a disk or tape, used to store data.
The amount of time that an electronic device can store energy.
A class of a cathode ray tube that is designed to hold an image for a long period of time, typically as long as power is supplied to the tube.
A group of wires, usually twisted or braided.
A wire that joins two light switches so that a light can be turned off or on from either switch.
A data storage technology using magnetic tape where the tape is in constant motion while reading or writing data.
A length of transmission line or waveguide that is connected at one end only.
Any part of a signal that is formed by the combination of several sources.
A simpler switch that is a component of a more complex switch, used in telephone exchanges or data routing.
A logic circuit or other electronic device whose output is the sum of two or more input signals or values.
Any of various disks of approximately the size of a floppy disk but capable of storing far larger amounts of data.
In nodal analysis: a combination of two nodes which are connected by a voltage source, allowing for the voltage of the nodes to be solved simultaneously without having to consider the unknown current between them.
To reduce unwanted frequencies in a signal.
Of electronic components, able to be soldered on top of printed circuit boards.
A method in which the electrical components are mounted directly onto the surface of a printed circuit board.
The frequency of rotation of the magnetic field inside an AC induction motor.
The adjustment of two electronic circuits or devices so as to operate at the same frequency.
A condition in which two oscillators have the same resonant frequency.
A single computer bus that connects the major components of a computer system, combining the functions of a data bus, an address bus, and a control bus.
A new computer part that has been removed from an unused, previously assembled system.
Not using or requiring the medium of tape, such as audio or video tape.
A tactile element in robotics etc.
Initialism of test board, a circuit board used to test a circuit for some specialized task.
Initialism of thermoelectric cooler: an electrical heat-transferring device which applies the Peltier effect.
The end of a line (wire, cable, etc) where signals or power are either transmitted or received, or a point along the length of a line where the signals or power are made available to apparatus; the hardware attached to the line in this spot, which allows connections to be fastened.
connected (especially a mobile phone to a computer, for use as a wireless modem)
A printer that operates by applying heat to selected areas of specially treated paper.
A resistor whose resistance varies rapidly and predictably with temperature and as a result can be used to measure temperature.
Initialism of through-hole technology.
A computer interface standard for connecting devices, combining PCI Express, DisplayPort and DC power in one connector.
An electronics chassis, physically external to a host system, that provides a means to connect PCI Express cards to that host using the Thunderbolt interface.
Any of several types of thermoelectric valve once used as a high-speed switch
A semiconductor diode having an extra "gate" terminal to switch it on.
Initialism of time interval.
Initialism of time-interval digitizer.
Initialism of time interval meter.
The process of delaying the sound emanating from one or more drivers in a loudspeaker or sound system to correct the transient response so that the sound output is simultaneous.
A time delay device forming part of a readout integrated circuit.
A technique used to track faults in networks, such as cable breaks or loose connections, in which a pulse of a known shape is transmitted over the network and an echo is created when the pulse strikes an obstacle or cable end.
A device for recognizing events and providing a digital representation of the time they occurred.
A time period used as a base measurement or frequency.
Initialism of triple-level cell.
A box containing a service (fibre optic microducts, mains water, etc.) set into the street or verge for connection to a property, typically containing a shutoff valve to allow for maintenance at the connected property.
An unwanted effect in the manufacture of electronic circuit boards, in which a component stands up on end instead of lying flat.
An input and output device that allows the user to interact with the computer by touching the display screen.
Initialism of Tensor Processing Unit, a circuit optimized for neural network machine learning.
The ratio of the change in output current to the change in input voltage across a circuit
Of a liquid crystal display: that reflects and transmits light.
The amount of time required for the switch output to settle within a given percentage of the final value following a change in the control input level.
The modulation (or regulation) of a secondary system.
A type of vacuum tube which amplifies electromagnetic signals, where the electron gun fires down the tube with an unmodulated electron beam, that passes through an interaction array, where the EM-signal is fed, which interacts with the electron beam, bunching the electrons, and transferring power to the signal.
On a CRT display, a group of three neighbouring phosphor dots, coloured green, red, and blue.
A pulse in an electronic circuit that initiates some component.
A thermionic valve containing an anode, a cathode, and a control grid; small changes to the charge on the grid control the flow from cathode to anode, which makes amplification possible.
The simplest form of frequency multiplier, that has an output frequency of three times the value of the input frequency.
That has been switched on or placed in the on position.
Initialism of three-wire bus.
An electronic speaker designed to produce high-frequency sound.
Abbreviation of transmitter.
Initialism of User Equipment (in UMTS).