long-welded
Of rails for railway track, welded into longer lengths, usually before they are laid, to help eliminate jointed track.
303 entries.
Of rails for railway track, welded into longer lengths, usually before they are laid, to help eliminate jointed track.
A free-motion sewing machine with an extended arm and frame for holding large quilts.
A railway sleeper lying parallel with the rail.
Deviation from the correct point of focus measured parallel to the axis.
A long cable used to raise or lower loads from a helicopter when landing is not possible.
A type of cast-on technique involving a long tail of yarn.
A long wall of coal that is mined in a single slice.
A joist that extends in cantilever out from the exterior wall (or wall plate) of a building, supporting the roof sheathing and providing a nailing surface for the fascia boards.
A round area of pavement that protrudes from one side of a road to accommodate turning vehicles with a wide turning circle.
A place at a terminus where trains or trams can turn round and go back the other way without having to reverse; a balloon loop, turning loop, or reversing loop.
Pruning shears with long handles, used for lopping.
The force exerted on a charged particle in an electromagnetic field.
A partial gauge fixing of the electromagnetic vector potential, used to eliminate the redundant spin-0 component in the (1/2,1/2) representation of the Lorentz group.
Acronym of Long-Range Reconnaissance Imager, a long-focal-length imager designed for high resolution and responsivity at visible wavelengths.
A truck with an open carriage, sometimes used for transporting construction workers.
Initialism of loss of signal.
Lossy; involving loss of information.
An interconnection point between components or transmission lines where the total power or energy entering the junction is exactly equal to the total power or energy leaving it.
Of a communication channel, subject to loss of signal strength.
A dangerous situation where the neutral wire in a split-phase power system becomes broken or disconnected, forcing all electrical current to flow directly between the two line wires and exposing loads connected between line and neutral to unstable and potentially-excessive voltages, posing a risk of equipment damage, electrical fire, or electric shock.
Destroyed or sunk, with all passengers and crew having died in the process.
A mass or ball of iron in a pasty condition, beaten by the trip hammer or rolls.
A cable carrying electrical power at fifty volts or less.
Possessing little power or capacity.
According to ASTM standard E 1918-97, a roof whose uppermost part is installed at a slope of 2/12 or 1:6 (9.5 degrees) or less.
Describing a filter, circuit, or system that rejects or attenuates a frequencies above a specified value while passing those be.
Abbreviation of liters per flush.
Initialism of leading pedestrian interval, a brief period when pedestrians are allowed to start crossing a street before vehicles are allowed to move.
Abbreviation of line printer.
Initialism of Lunar Precursor Robotic Program.
Initialism of Lunar and Planetary Science Conference.
Initialism of liquefied refinery gas.
Initialism of Lunar Reconnaissance Orbiter.
A car where the engine has been replaced by a General Motors LS-series internal combustion gasoline engine.
Initialism of limited-slip differential.
Initialism of large scale integration.
Initialism of low-speed pre-ignition.
Initialism of low speed vehicle.
Initialism of left twist.
Initialism of loss of tail rotor effectiveness (by a helicopter).
Initialism of lunar transfer orbit.
Initialism of London Underground.
Acronym of low-cost uncrewed combat attack system
local usage details; a list of locally called numbers, often provided by telecom companies to the police as part of an investigation.
To sift using a sieve, particularly in mining tin or silver.
To alter the vertical angle of the jib of a crane so as to bring it level with the load.
A device for terminating an electrical conductor to facilitate the mechanical connection; to the conductor it may be crimped to form a cold weld, soldered or have pressure from a screw.
A specially shaped nut used to hold the wheels on an automobile.
A chimney; also, the top part of a chimney.
The luminous flux emitted in a given direction divided by the product of the projected area of the source element perpendicular to the direction and the solid angle containing that direction (i.e. luminous intensity divided by unit area), measured in stilbs or apostilbs.
An observation of a lunar distance (“the angle between the Moon and another celestial body”), especially for establishing the longitude of a ship at sea.
A unit of length, based on the average distance between the Earth and the Moon.
a lenticular mass, nodule, or ball
One who handles or manages a lurry.
A part of the body of a commercial or recreational vehicle that extends over the cab.
Pertaining to the top-end market segment for mass production mass market vehicles, above the premium market segment.
Initialism of low voltage differential signaling.
Abbreviation of landing vehicle, wheeled (amphibious truck).
Initialism of Living with a star.
A short side line, connected with the main line; a turn-out; a siding.