T
Ellipsis of T-shirt.
536 entries.
Ellipsis of T-shirt.
A structural member with a cross section shaped like the letter T.
The generic designator for several digitally multiplexed signal carrier systems.
Specifies the remaining time until some future event such as a takeoff or encounter commences.
An electromagnetic wave with a frequency intermediate between, and sharing the properties of, short radio waves and long infrared waves, generally in the 0.1 to 10 terahertz (THz) band of frequencies.
A lightweight shirt without buttons, usually with short sleeves and no collar. Often made of cotton and frequently bears a picture or slogan.
An automobile roof with a removable panel on each side of a rigid bar running from the center of one structural bar between pillars to the center of the next structural bar.
Initialism of traffic advisory (a type of TCAS warning).
Abbreviation of transportation as a service.
A hinged device allowing for the easy folding of a mast 90 degrees from perpendicular, as for transporting the boat on a trailer, or passing under a bridge.
To join (pieces of timber) together using coaks.
Typesetting of tabular matter.
The letting of one timber into another by alternate scores or projections, as in shipbuilding; a crude form of dovetailing.
A paper size 11 × 17 inches (279 × 432 millimetres) in dimensions.
A loose seam used to temporarily fasten pieces of cloth.
A tackiness agent; a substance which is added in order to increase tack.
Loose temporary stitches in dressmaking etc.
A pulley over which a rope runs.
A person who repairs weaving looms.
Given a texture resembling that of taffeta.
To spread the end of a pipe outward so as to form a wide thin flange.
Solder tags/lugs on a strip used to connect wires by soldering.
A rope spliced to the strap of a block, by which it may be lashed to anything.
A cone-shaped piece on the tail of a jet or aeroplane where exhaust escapes.
A fin-like projection at the rear of a car, common on American cars of the 1950s.
A tunnel for drawing spent air away from the working face of a mine.
An opening in a garment for a tail to go through.
The waste that remains after the minerals have been extracted from an ore by ore dressing; the waste from coal mining.
A tightly stuffed pillow used as a curved mold when pressing curved areas of clothing.
An ornamental design at the end of a chapter or page.
An exhaust pipe exhausting to the aft of the vehicle.
The rapid, uncontrollable descent of an aircraft in a steep spiral.
The quantity of copy given to a compositor at one time.
To shorten (a garment), especially by hemming.
The removal of sheets from the press.
A person employed to unhook the wagons at self-acting inclines.
On a production line, the average production time per unit that is necessary to meet customer demand.
A prepaid amount of time on the bill agreement of a mobile phone.
A railway vehicle used to tamp down ballast.
A self-propelled rail-mounted machine used to pack or tamp ballast under railway tracks; a ballast tamper.
To strike two metal objects together loudly in order to persuade a swarm of honeybees to land so it may be captured by the beekeeper.
Straight; not horizontally curved.
Ellipsis of tank engine or tank locomotive.
A railroad car or rolling stock designed to transport liquids or gases.
A rail wagon designed to transport liquids or gases.
Waste matter from tanks, especially the dried nitrogenous residue from tanks in which fat has been rendered, used as a fertilizer.
An aircraft built or modified to carry water and/or fire retardant for dropping on wildfires.
A cylindrical tool used to cut an internal screw thread in a hole, with cutting edges around the lower end and an upper end to which a handle is fitted to turn the tool.
A strong flexible band rotating on pulleys for directing the sheets in a printing machine.
To complete the design of an integrated circuit so that the photomask can be sent out for fabrication.
Not using or requiring the medium of tape, such as audio or video tape.
Ellipsis of machine taper.
In a blast furnace, a hole which molten metal or slag is tapped off through.
In early wireless telegraphs, a device used to shake loose the filings of a coherer.
A connection made to some point between the end terminals of a transformer coil or other component.
A small bubble or blister in the flood coat of an aggregate-surfaced built-up membrane
A semiconvertible car body style with a removable roof section and a full-width roll bar behind the seats.
The sliding crosspiece, or vane, on a leveling staff.
The area of an airport, other than the runway, where planes park or maneuver.
A type of one-masted vessel with a lateen sail and a foresail, used in the Mediterranean.