DCT
Initialism of dual clutch transmission.
483 entries.
Initialism of dual clutch transmission.
Initialism of daily driver: a vehicle which is used for everyday commuting, unlike a weekend warrior / Sunday Funday vehicle.
Initialism of direct distance dialing (“network-provided service that enables non-local telephone calls to be made without operator assistance”).
Initialism of direct dial-in.
Initialism of double data rate.
Initialism of direct digital synthesis.
To remove the electrification for powering electric trains from a railway.
A signal distortion, carried out at a receiver, in order to undo the effects of pre-emphasis at the transmitter.
Air that is subject to little or no ventilation, thus, little to no air exchange.
A storm shutter fitted to the outside of the quarter-gallery door.
The inner end of a drift or tunnel.
A furrow left in the field that is slightly wider than twice the width of a plow bottom, usually occurring at the completion of a field.
the portion of a vein in which there is no ore
Being hauled as part of a train's consist while not providing any motive power.
The weight of a structure itself, including the weight of fixtures or equipment permanently attached to it.
A lever used as a safety device, typically on trains, which shuts off power if the operator releases their grip.
Part of a neutral section.
A stand of trees that have died.
The total (unpowered) weight of a train to be propelled (or hauled) by the locomotive; another locomotive being hauled dead as part of the train is a dead weight.
A region where mobile phones do not operate because there is no base station or repeater nearby.
A sealed airspace in a cavity wall.
Relating to a form of electronic prototyping where integrated circuits are stuck upside down to the breadboard and soldered to directly.
Backlash in a mechanical system.
(transitive) To remove spent or dead blossoms from a plant.
A vehicle that is traveling on a leg of its route in which it does not carry any cargo.
A long object, often a timber or log, buried to serve as an anchor for a wall or for stays.
To melt steel at high temperatures in order to deoxidize it.
The substances that enclose the ore on every side.
A forced landing without propulsion of an aircraft that normally operates with propulsion.
To remove the bark from a tree, especially one that has been felled.
To remove binders (organic or other binding substances) from (something metal).
a tool for debinding
The removal of bismuth from lead during refining.
To remove the small ripple of current that forms when a mechanical switch is pushed in an electrical circuit and makes a series of short contacts.
To remove a hidden electronic surveillance device from (somewhere).
Abbreviation of decrease.
An SI unit of current equal to 10¹ amperes. Symbol: daA
A set of resistors, capacitors, etc. connected so as to provide even increments between one and ten times a base electrical resistance.
A piece of test equipment used during prototyping of circuits to vary the resistance, capacitance, or inductance by means of a knob or switch.
A counter that counts in decimal digits, rather than in binary.
An SI unit of mass equal to 10¹ grams. Symbol: dag
An SI unit of catalytic activity equal to 10¹ katals. Symbol: da
An SI unit of length equal to 10¹ metres. Symbol: dam
A nickname for either the 0-10-0 or 2-10-0 train configurations.
An SI unit of time equal to 10¹ seconds. Symbol: das
Loss of airspeed due to drag.
To place away from the centre; to make eccentric.
An SI unit of electrical current equal to 10⁻¹ amps. Symbol: d
An SI unit of electrical current equal to 10⁻¹ amperes. Symbol: dA
An SI unit of mass equal to 10⁻¹ grams. Symbol: dg
An SI unit of catalytic activity equal to 10⁻¹ katals. Symbol: d
An SI unit of fluid equal to 10⁻¹ liters. Symbol: dl.
An SI unit of length equal to 10⁻¹ metres. Symbol: dm
An SI unit of time equal to 10⁻¹ seconds. Symbol: ds
To complete the upper deck of a vessel.
Any mechanism in which rays either diverge or converge from parallelism
A reduction in the number of stitches, usually accomplished by suspending the stitch to be decreased from another existing stitch or by knitting it together with another stitch. See Decrease (knitting).
Initialism of Digital Enhanced Cordless Telecommunications (a standard originated in Europe that is primarily used for creating cordless phone systems).
Abbreviation of diesel exhaust fluid.
the original software programming settings as set by the factory