steam generator
A type of boiler fitted in a diesel locomotive or another rail vehicle, which provided steam heating in steam-heated passenger trains that had previously been hauled by steam locomotives.
965 entries.
A type of boiler fitted in a diesel locomotive or another rail vehicle, which provided steam heating in steam-heated passenger trains that had previously been hauled by steam locomotives.
A locomotive, usually for use on a railway, that is powered by steam.
An excavating machine designed to effect a shovelling action through steam power.
The bridge of extra stitches used in the steeking technique.
Any item made of this metal, particularly including:
All the steel components of a structure.
An astronaut or engineer who quickly comes up with a solution to a difficult problem while under extreme pressure.
According to ASTM standard E 1918-97, a roof whose uppermost part is installed at a slope of 2:12 (9.5 degrees) or more.
a column originating in the dashboard and ending at the steering wheel
An adapted driving device that attaches a spinnable knob to the steering wheel, allowing free spinning for those who can only grip the wheel with one limb, to be well attached to the wheel and allow the wheel to turn fully while gripped.
One vertex of a Steiner tree.
The vertical or nearly vertical forward extension of the keel, to which the forward ends of the planks or strakes are attached.
A shelf set into a mineshaft for storing waste material, or for use as a step or support.
A device to prevent foul air from rising from the openings of sewers, drains, etc., by means of a water seal.
Pertaining to a narrow opening or slit in an opaque barrier that restricts the light which reaches the eye.
The button joining a glass's stem to its foot.
Individual pieces of sheet metal material used to flash walls, around chimneys, dormers and such projections along the slope of a roof. Individual pieces are overlapped and stepped up the vertical wall.
To interrupt, overpower, or override (another transmission on the same frequency) with one's own transmission.
To drive fast; to step on the accelerator.
With the fenders and wheel wells outside of the main body shell.
The cutting or dissection of solids.
A metal printing plate cast from a matrix moulded from a raised printing surface.
The act or technique of printing from stereotype plates.
The process of making stereotype plates and printing from them.
Obsolete form of starling (“an enclosure like a coffer-dam, formed of piles driven closely together before any structure or work, as a protection against the wash of waves, commonly used to protect the piers of a bridge”).
A ship's officer who is in charge of making dining arrangements and provisions.
An elongated piece of wood or similar material, typically put to some use, for example as a wand or baton.
a non-penetrating fastener that is adhered to the waterproofing surface; typically used to retain insulation, drainage panels, etc., against the waterproofing to prevent sliding and displacement.
As much type as fills a composing stick.
A cutting in the early stages of growth.
A small adhesive particle found in wastepaper.
A fault in a digital circuit, where a signal does not change as expected, but remains always in one state.
Of the wind, with great force; strongly.
One of a series of angle bars, Z-bars, beams, rods, or other shapes, attached in order to provide them the necessary stiffness or rigidity.
Image-formation property of an optical system which focuses a single point source in object space into a single point in image space
A technique of printing with points, consisting of their arrangement in pictures.
A bent rebar wrapped around the main rebars to reinforce against shear stress.
A ridge of ploughed land between two furrows.
To stitch (edges of relatively thick cloth, fur, etc, for example on either side of a join or tear) together in a way that is invisible from the 'front', by sewing part of the way into and then back out of the thickness of the material from the 'back' side (without the thread going all the way through to the 'front' side of the material).
The frame or timbers on which a ship rests during construction.
A railway car for carrying livestock.
A vehicle that is kept and maintained to legal specifications.
Livestock that is wintered and then sold in the spring; often contrasted with a feeder when the focus is on intended disposition.
A ratio of the actual density of trees in an area to the ideal density that would make the fullest use of the land.
A pile of coal or ore heaped up on the ground after it has been mined.
A system of working in ore, etc., when it lies not in strata or veins, but in solid masses, so as to be worked in chambers or stories.
A stand or table with a smooth, flat top of stone, commonly marble, on which to arrange the pages of a book, newspaper, etc. before printing.
An editor who works with the compositor at the imposing stone to determine how material will be laid out on the page.
The practice of covering plant roots with stone, in the manner of a mulch.
A subeditor having a similar role to that of the stone editor.
A miner who makes excavations in hard strata other than coal.
A person (e.g., smallholder, farm laborer) who gathers sheaves into stooks (shocks).
A plant that has been cut down until its main stem is close to the ground, resembling a stool, to promote new growth.
To fill (a part of a mould) with sand, where a part of the cavity left by the pattern is not wanted for the casting.
A sign by the side of a road or street, often at an intersection, instructing vehicle drivers to stop.
To completely stop all traffic.
To excavate in the form of stopes.
A kind of drill for excavating stopes.
The removal of the desired ore from an underground mine, leaving behind an open space known as a stope.
A train that calls at all or almost all stations between its origin and destination, including very small ones.